AIR ONE SOLAR
CHARGE CONTROLLERS FOR OFF GRID IN STOCK.
MORNINGSTAR HAS BEEN PROVEN FOR MORE THAN 20 YEARS IN RELIABILITY.
CHOOSING THE RIGHT CHARGE CONTROLLER FOR YOUR APPLICATION INCREASES
BATTERY LIFE AND OVERALL PERFORMANCE AND RELIABILITY.
MORNINGSTAR PRODUCT GUIDE & SPECIFICATIONS
|
MORNINGSTAR TS-MPPT-60-LIT W/METER
Morningstar’s TriStar MPPT TS-60 solar controller features TrakStar
Technology™, an advanced maximum power point tracking (MPPT) battery
charger for off-grid photovoltaic (PV) systems up to 3kW. The controller
provides the industry’s highest peak efficiency of 99% and loses
significantly less power compared to other
MPPT controllers. This
particular model includes a Remote Temp Sensor.
The TriStar MPPT features "smart tracking" that maximizes the energy
harvest from the PV by rapidly finding
the solar array peak power point
with extremely fast sweeping of the entire I-V curve. Unlike theMPPT TS-45,
the MPPT TS-60 has an ethernet port for a fully web-enabled interface.
Both products allow you to log up to
200 days of data. This version also
comes with a pre-installed meter. This charge controller will
require DC disconnects and typically a combiner box with fuses or
breakers for
wiring the PV input. See related items for an appropriate
battery breaker and combiner box.
- 99% peak efficiency
- Extensive electronic protections
- Recognition of multiple power points during shading or mixed PV arrays
- Excellent performance at sunrise and low solar insulation levels
- Enables system monitoring, data logging and adjustability.
- Robust thermal design and no cooling fans
- Parallel circuit design provides less stress and longer life for electronic components
- No mechanical relays
- Extensive electronic protections including PV short circuit protection
- Epoxy encapsulated inductors and conformally coated printed circuit boards
- Pre-installed digital meter face
- MPN: TS-MPPT-60M
|
Morningstar’s TriStar MPPT TS-60 solar controller features TrakStar
Technology™, an advanced maximum power point tracking (MPPT) battery
charger for off-grid photovoltaic (PV) systems up to 3kW. The controller
provides the industry’s highest peak efficiency of 99% and loses
significantly less power compared to other
MPPT controllers. This
particular model includes a Remote Temp Sensor.
The TriStar MPPT features "smart tracking" that maximizes the energy
harvest from the PV by rapidly finding the solar array peak power point
with extremely fast sweeping of the entire I-V curve. Unlike the MPPT TS-45, the MPPT TS-60 has an ethernet port for a fully web-enabled interface. Both products allow you to log up to
200 days of data. This
charge controller will require DC disconnects and typically a combiner
box with fuses or breakers for
wiring the PV input. See related items
for an appropriate battery breaker and combiner box.
|
Morningstar's TriStar-60 Controller is a three function controller
that provides reliable solar battery charging, load control or load
diversion regulation. This controller operates in only one of these
modes at a time but, two or more controllers may be used to provide
multiple functions. The TriStar-60 uses advanced technology and
automated production to provide exciting new features at a competitive
cost.
The TriStar-60 is UL listed and is designed for both solar home systems and industrial applications.
Optional: Morningstar's Remote Temperature
Sensor (RTS) provides very accurate battery charging in solar systems
that experience temperature variations during the year. Use with the
TriStar for battery charging or diversion control modes (not for load
control mode) whenever the temperature of the battery varies more than
5°C (9°F) during the year. When used with the TriStar™ controller (no
on-board temperature compensation), the RTS adjusts charging for
temperature changes at the battery.
- Dimensions (LxWxH): 2.8 × 5.0 × 10.3 inches
- Weight: 4.7 lbs
- 100% solid state microprocessor controller
- Rated for 45A at 12, 24, or 48 volts
- Includes RS-232 communication port for customizing controller set points or data logging
- Optional on-board meter and remote meter
- Provides extra bending room for large wires
- Ratings to 60A at 48 VDC will handle solar arrays up to 4kW
- Designed for mechanical fit on Xantrex power panel or Outback PSDC
- MPN: TS-60
|
Morningstar’s TriStar MPPT TS-45 solar controller features TrakStar
Technology™, an advanced maximum power point tracking (MPPT) battery
charger for off-grid photovoltaic (PV) systems up to 3kW. The controller
provides the industry’s highest peak efficiency of 99% and loses
significantly less power compared to other MPPT controllers. This
particular model includes a Remote Temp Sensor.
The TriStar MPPT features "smart tracking" that maximizes the energy
harvest from the PV by rapidly finding the solar array peak power point
with extremely fast sweeping of the entire I-V curve. The TriStar MPPT
TS-45A enables system monitoring, data logging and adjustability. It has
a meterbus for communications between compatible Morningstar products
and a Serial RS-232 connection for personal computers. This
charge controller will require DC disconnects and typically a combiner
box with fuses or breakers for wiring the PV input. See related items
for an appropriate battery breaker and combiner box.
|
Morningstar's TriStar-45 Controller is
a three function controller that provides reliable solar battery
charging, load control or load diversion regulation. This controller
operates in only one of these modes at a time but, two or more
controllers may be used to provide multiple functions. The TriStar-45
uses advanced technology and automated production to provide exciting
new features at a competitive cost.
The TriStar-45 is UL listed and is designed for both solar home systems and industrial applications.
Optional: Morningstar's Remote Temperature
Sensor (RTS) provides very accurate battery charging in solar systems
that experience temperature variations during the year. Use with the
TriStar for battery charging or diversion control modes (not for load
control mode) whenever the temperature of the battery varies more than
5°C (9°F) during the year. When used with the TriStar™ controller (no
on-board temperature compensation), the RTS adjusts charging for
temperature changes at the battery.
- Dimensions (LxWxH): 5.5 × 11.4 × 5 inches
- Weight: 4.7 lbs
- 100% solid state microprocessor controller
- Rated for 45A at 12, 24, or 48 volts
- Includes RS-232 communication port for customizing controller set points or data logging
- Optional on-board meter and remote meter
- Provides extra bending room for large wires
- Ratings to 45A at 48 VDC will handle solar arrays up to 4kW
- Designed for mechanical fit on Xantrex power panel or Outback PSDC
- MPN: TS-45
|
Morningstar’s third generation ProStar™ PWM charge controller
offers additional features and capabilities while maintaining the same
form factor, quality and reliability that has made the ProStar the
world’s leading mid-range PWM solar controller for professional and
consumer applications since 1995. The PS-30M includes a high resolution
graphical meter to adjust settings and display logged data with the
capability to store up to 256 days of data logging. The PS-30M also
features advanced programmable lighting controls and enhanced surge
rating for heavy DC loads. The 100% solid state PS-30M controller has an
estimated service life of 15 years.
- Dimensions (LxWxH): 4.1 × 6 × 2.2 inches
- Weight: 1 lbs
- 12V or 24V
- Estimated 15 year life
- IEC 62109 compliant
- PWM series battery charging (not shunt)
- Parallel for up to 300 amps
- Temperature compensation
- Tropicalization
- No switching or measurement in the grounded leg
- 100% solid state?Very low voltage drops
- Current compensated low voltage disconnect (LVD)
- Capable of 25% overloads
- Transient surge protection
- MPN: PS-30M
MORNINGSTAR PROSTAR CONTROLLER 15 OR 30 AMPS AT 12/24/48 VOLTS
|
MORNINGSTAR SUNSAVER DUO SSD-25
Morningstar’s SunSaver Duo is an advanced PWM two battery controller
for RV’s, caravans, boats and cottages. This product will charge two
separate and isolated batteries at the same time, such as a “house” and
an engine battery, based on user selectable priorities.
The SunSaver Duo employs Morningstar’s legendary SunSaver controller
technology, whose long-term track record for high reliability and
improved battery charging is well-recognized in the solar industry. This
controller also includes a backlit remote meter which may be mounted in
or on a wall, and displays digital and pictorial status information
about the solar power system.
The SunSaver Duo is epoxy encapsulated for environmental protection,
is user adjustable via DIP switch or connection to a personal computer,
and has an optional remote temperature sensor.
- Dimensions (LxWxH): 2.2 × 6.7 × 1.6 inches
- Weight: .6 lbs
- Two Battery Charging
- Provides Useful Information
- Lower Cost
- Easy to Install
- Longer Battery Life
- Extensive Electronic Protections
- Highly Reliable
- Epoxy encapsulation protects the controller against dust and high humidity.
- Efficient electronics and a conservative thermal design allow the controller to operate reliably at high temperatures.
- Five year warranty and estimated 15 year life.
- MPN: SunSaver Duo
|
MORNINGSTAR SS-MPPT-15L-12V
- Dimensions (LxWxH): 2.5 × 6.6 × 2.9 inches
- Weight: 1.3 lbs
- Maximizes energy harvest with peak efficiency of 97.5%
- Allows the use of high voltage PV modules including thin films
- Converts 36V or 24V solar to 12V battery charging
- May be used as a diversion controller for wind or micro-hydro systems
- MPN: SS-MPPT-15L
|
- Dimensions (LxWxH): 2.2 × 6.6 × 1.3 inches
- Weight: .6 lbs
- Using solar array voltage to determine day and night, the SunLight provides 10 different lighting control options.
- By measuring the length of the night, the SunLight’s ON/OFF/ON
options provide the capability to turn on the light at sunset, turn off
the light after 3 to 6 hours, and then turn on the light again for 1 or 2
hours before sunrise.
- The length of the night is calculated by taking a 4 night average,
and thus it automatically adjusts for seasonal changes in the length of
the night
- The test button helps the installer by blinking the red LED to
confirm correct selection of lighting control option, and also turns on
the light for 5 minutes to verify that the light is operating
correctly.Timer accuracy is within 2 seconds.
- MPN: SL-20L-12V
|
- Dimensions (LxWxH): 3 × 7 × 2 inches
- Weight: .07 lbs
- Microcontroller digital accuracy
- Fully automatic operation
- Ten field adjustable lighting control options
- Special on/off/on lighting functions
- Manual test capability
- LVD override protection
- Detects day and night using the PV array
- Suitable for all 12/24 Vdc lamps
- Sealed/Flooded battery select
- Temperature compensation
- Parallel with a SunSaver for 40 amps solar
- Includes SunSaver battery charging circuit
- MPN: SL-20L-24V
|
MORNINGSTAR SK-12-Sunkeeper
Morningstar's SunKeeper solar controller, rated at 6 amp or 12 amp at
12VDC, provides a low-cost regulated output directly from the solar
module to maximize battery life in small solar power applications. It
has an epoxy encapsulation and is rated for outdoor use. It is also
designed for extremely efficient power electronics and is rated to 70°C.
The Morningstar SunKeeper 6 is certified for use in Class 1, Division 2
hazardous locations which makes it ideal for solar powered oil/gas
applications.
- Dimensions (LxWxH): 2.0 × 3.9 × .5 inches
- Weight: .3 lbs
- Epoxy encapsulated and rated for outdoor use
- Designed using extremely efficient power electronics and is rated to 70°C
- Certified for use in Class 1, Division 2 hazardous locations, making
it an ideal controller for solar powered oil/gas applications
- MPN: SK-12
|
MORNINGSTAR SK-6-Sunkeeper
The SunSaver 6 is a PWM controller and can control up to 6.5 array
amps (can be parallel for 40 amps or more). The SunSaver's advanced
design delivers outstanding performance and value. The SunSaver 6L also
has an LVD. The SunSaver 6L 12 volt controller offers most of the same
features of the ProStar line, but without the battery status LEDs,
automatic equalization or the optional LCD display.
SunSaver's low cost is made possible by Morningstar's unique approach
to design and manufacturing: automated production, latest power
electronic power technologies, latest control and logic technologies,
and high volume manufacturing.
- Dimensions (LxWxH): 2.0 × 3.9 × .5 inches
- Weight: .3 lbs
- Epoxy encapsulated and rated for outdoor use.
- Designed using extremely efficient power electronics and is rated to 70°C.
- Certified for use in Class 1, Division 2 hazardous locations, making
it an ideal controller for solar powered oil/gas applications.
- MPN: SK-6
|
MORNINGSTAR SG-4-Sunguard-Solar-Controller
Morningstar’s
SunGuard is the world’s leading single module controller. Morningstar
has combined all the advantages of their SunSaver charging circuit in a
less expensive package to provide an economical controller for small PV
systems.
- Dimensions (LxWxH): 3 × 2.1 × 1.6 inches
- Weight: .3 lbs
- 100% Solid State
- True 0 to 100% PWM duty cycle
- Setpoint accuracy to 35mV
- Rated to 20% overloads
- Fully encapsulated in epoxy potting
- MPN: SG-4
|
Morningstar’s TriStar Meter-2 (TS-RM-2) Charge Controller
Morningstar's TriStar Remote Meter-2 (TS-RM-2) is an advanced digital
meter for use with any TriStar™ solar controller. It is recommended for
the Tri-star MPPT Charge Controller.
This remote meter can be
flush mounted up to 98.4 feet away from the controller. The meter's
easy-to-read display (2 line x 16 character LCD's) shows extensive
system and controller information. It includes logged data, bar graph
metering, alarms and faults for easy troubleshooting. Its language
capability includes English, French, German, Portuguese or Spanish.
Using Morningstar's MeterHub allows the TS-RM-2 to be networked in
multi-controller systems, so that aggregate system and individual
controller data to be displayed simultaneously on one meter.
Features & Attributes
- Dimensions (LxWxH): 4.5 × 4.5 × 1.4 inches
- Weight: 2.25 lbs
- Uses standard 6 conductor RJ-11 connectors.
- TS-RM-2 fits a “double gang” electrical box and includes 30 meters (98.4 feet) of cable.
- Both data and meterbus power flow over a single cable.
- Network supports up to 15 devices and, optionally, more than one meter per system.
- Four directional pushbuttons for easy navigation of display screens.
- Backlighting to enhance readability.
- This optional meter can be added during the initial controller
installation or added anytime in the future. It can be connected
temporarily to troubleshoot one system and then moved to monitor other
sites.
- Displays individual controller data from up to 14 TriStar controllers with optional Morningstar Meterhubs.
- Aggregates system data to show total charge, load and battery charge/discharge state.
- Auto detects any device found on the network.
- MPN: TS-RM-2
|
Morningstar Corporation
Digital Meter TS-M-2 (mounted on controller)
for TriStar Charge Controllers
The meter will display a great deal of information about the
TriStar controller and the operation of your system. In addition,
the meters enable manual functions and controller diagnostics.
These capabilities will increase your confi dence that
the system is working properly and will help you to improve
system reliability, battery life, and system performance. It is
worth the time getting to know your meter!
Features
- Intertek ETL Recognized for use with Morningstar’s TriStar family of charge controllers (both the TS line and TS-MPPT line)
- Complies with CE and LVD standards
- Suitable for 12, 24, 48 Vdc systems
- Fully protected from wiring faults
- Controller-mounted and remote versions can be used together
- Extended LCD temperature rating (-20oC to +70oC)
- Multilingual display (English, French, German, Portuguese, Spanish)
- Displays aggregate system data from multiple TriStar controllers
- Manual Ah resets and equalization control for individual controllers and for multi-controller systems
- Diagnostic capabilities
- View internal logged data stored in TriStar controllers that have datalogging capability
- Connections are by standard RJ-11 6-position modular plugs
- 5-year standard warranty
|
MORNINGSTAR RM-1-Remote-Meter
Four digit display with custom icons Compatible with several Morningstar
controllers and inverters Displays voltage, current, temperature,
logged data, settings, alarms and error reporting Includes 10 meters of
wiring with RJ-11 connectors and mounting screws
- Mount in the wall or on the wall
- Adjustable Settings
- Includes: (4) #8 x 1-3/4" screws
- Includes: Meter Maps
- Includes: Mounting Frame and 10m (33 ft) Meter Cable
|
Morningstar
MeterHub Communication Hub
HUB-1
Morningstar's MeterHub (HUB-1) allows multiple
Morningstar products to communicate over a Meterbus netword to provide
improved data monitoring, additional capabilities and lower system cost.
- Enables multiple controllers to share a single TriStar meter and
display both single controller data (TriStar #1, TriStar #2…) as well as
aggregated data for the entire system.
- Enables multiple controllers to share a single Relay Driver and
fully utilize all 4 channels of the Relay Driver for different functions
(alarms, load disconnects, generator starts) from multiple products.
The MeterHub allows up to 15 Morningstar products
on a single MeterBus network. The product electrically isolates devices
that supply power to the network, preventing damage to the network in
the event of grounding problems. Five status LED’s indicate the proper
network connection to each port. The MeterHub is suitable for either
wall or DIN rail mounting.
Compatible With:
TriStar, TriStar MPPT
TriStar Meter-2
TriStar Remote Meter2
SunSaver MPPT
Relay Driver
|
MIDNITE SOLAR CLASSIC 250
|
12 Through 72 volts on Classic SL’s
Classic SL-150 = 96A on 12V, 94A on 24V and 86A on 48V battery
Classic SL-200 = 79A on 12V, 78A on 24+48V and 65A on 72V battery
Classic SL-250 = 61A on 12V, 62A on 24V, 55A on 48V and 43A on 72V battery
Classic SL-150 = 150V + HyperVOC (battery voltage up to 48V) Example 150V + 48V = 198VOC
Classic SL-200 = 200V + HyperVOC (battery voltage up to 48V)
Classic SL-250 = 250V + HyperVOC (battery voltage up to 48V) (NOTE: See HyperVOC at bottom)
98% (Typical system)
2.8W - 4W
Zero - Internal relay for reverse current
Low Battery voltage disconnect and re-connect of loads fully programmable with 2 Auxiliary outputs to control external load
disconnect /re-connect switches
Standard all models - Extended VOC range for cold climates
Standard all models - resettable, no fuse to blow
Bulk, Absorb, Float as well as Equalization
10-100VDC
Adjustable Voltage and Duration, Manual or Auto
Protected to Max VOC ( Classic MPPT Charger Controllers are fully protected from reverse current on both input and output)
Fully protected ( Classic MPPT Charger Controllers are fully protected from reverse current on both input and output)
Fully protected
Automatic when BTS is installed, Adjustable mV per degree C per 2V cell
2 Auxiliary outputs, Aux1 can be 12V out or dry contact, Aux2 is 12V out or Logic IN
Graphical display
Standard 4 conductor phone cable, no hub needed
RS232 and ModBus openly published protocol
Display (MNGP) can be relocated and a second display can be added
75 C
380 days of daily history, 24 hours of data at 5 minute intervals
Requires 2 pole input and output breakers
Minimum of -40C to 50C - Controller will auto derate as temperature rises above 25C
Indoor type IP30 (The Classic is IP22 Rated to 60529 when used with Classic Drip Shield)
Single 1" conduit (35.05mm) on left and right sides. Two 1" conduit (35.05mm) on bottom. Two 3/4" conduit (27.76mm) on back.
5 Year standard
12 Lbs. (5.45 kgs) - 14.9" x 6" x 4" (378mm x 152mm x 102mm)
19" x 8.5" x 5.7" (482.6mm x 215.9mm x 144.78mm)
MNGP graphical display, 3ft networking cable (NOTE: MNGP standard with all Classic SL models)
Listed by ETL for US & Canada, CE Certified, FCC Class B, IEC62109 pending
Nominal Battery Voltage
Maximum Output Current
PV Open Circuit Voltage VOC
(NOTE: See HyperVOC at bottom)
Power Conversion Efficiency
Maximum Stand-By Self-Consumption (12V)
Reverse Current At Night
Low Battery Voltage
Hyper VOC (NOTE: See HyperVOC at bottom)
Ground Fault Protection
Charging Regulation
Battery Voltage Regulation Set Points
Equalization Charging
PV Reverse Polarity
Battery Reverse Polarity
Battery Short Circuit
Battery Temp Compensation
Programmable Auxiliary Control Output
Graphic Display
Networking Cabling
Communications
Remote Display
Terminal Rating
Data Logging
Positive Ground Applications
Operating Temperature
Environmental Rating
Conduit knock Outs
Warranty
Weight & Dimensions
Shipping Dimensions HxWxD
Options
Certifications
|
AS 12 VOLT 25 AMP CHARGE CONTROL PRE-WIRED BOX W/WHIP. Comes Complete with 10AGW MC4 Cables w/connectors. Battery cables and connectors with Heavy Duty Fuse. Diode and MC4 Inline Fuse. $299.00
|
AS 24 VOLT 25 AMP CHARGE CONTROL
PRE-WIRED BOX W/WHIP. Comes Complete with 10AGW MC4 Cables w/connectors.
Battery cables and connectors with Heavy Duty Fuse. Diode and
MC4 Inline Fuse. $309.00
|
AS 36 VOLT 25 AMP CHARGE CONTROL
PRE-WIRED BOX W/WHIP. Comes Complete with 10 AGW MC4 Cables w/connectors. 8 AGW
Battery cables and connectors with Heavy Duty Fuse. Diode and
MC4 Inline Fuse. $319.00
|
AS 48 VOLT 25 AMP CHARGE CONTROL
PRE-WIRED BOX W/WHIP. Comes Complete with 10 AGW MC4 Cables w/connectors. 8 AGW
Battery cables and connectors with Heavy Duty Fuse. Diode and
MC4 Inline Fuse.
|
AS400W48V SOLAR GOLF CART KIT (Shown Below is AS400W48 Kit Completed.)
400 Watt Solar Powered Golf Cart Kit. 4 100 watt mono-crystalline solar
panels. 1 48 volt 25 amp charge controller pre-wired with MC4 panel
connectors & battery hook-up with disconnect. All mounting hardware
included. Digital voltmeter included. BATTERIES NOT INCLUDED.
Complete 400 Watt 48 Volt Solar Powered Golf Cart Kit
Kit: AS400W48V $1495.00
AS300W36V SOLAR GOLF CART KIT (Shown Below is AS300W36 Kit Completed.)
300 Watt Solar Powered Golf Cart Kit. 3 100 watt mono-crystalline solar
panels. 1 36 volt 25 amp charge controller pre-wired with MC4 panel
connectors & battery hook-up with disconnect. All mounting hardware
included. Digital voltmeter included. BATTERIES NOT INCLUDED.
Complete 300 Watt 36 Volt Solar Powered Golf Cart Kit
Kit: AS300W36V $1295.00
|
Photo Album Gallery Place Holder - Please wait while the Photo Album loads.
If the album does not show, please refresh the page to try again.
|
Photo Album Gallery Place Holder - Please wait while the Photo Album loads.
If the album does not show, please refresh the page to try again.
|
Photo Album Gallery Place Holder - Please wait while the Photo Album loads.
If the album does not show, please refresh the page to try again.
|
GOLF CART KITS AVAILABLE IN 400 WATT 48 VOLT & 300 WATT 36 VOLT. 100 WATT MONO-CRYSTALLINE SOLAR PANELS. CHARGE CONTROLLER IS 99.5% EFFICIENT AND EVEN BRINGS OLD BATTERIES BACK TO LIFE. EVERY CHARGE CONDITIONS AND MICRO- EQUALIZES THE BATTERIES WITHOUT DAMAGE OR OVERCHARGING & GASSING.
BEFORE ORDERING: CHECK BATTERY VOLTAGE OF EACH BATTERY FIRST TO MAKE SURE YOU DON'T HAVE A SHORTED CELL!
THIS KIT WILL BRING YOUR BATTERIES BACK TO LIFE ENOUGH TO PLUG THEM BACK IN. MOST GOLF CART CHARGERS WON'T WORK IF THE BATTERIES ARE BELOW A CERTAIN VOLTAGE. AFTER A FULL CHARGE 6 HOURS OF FULL SUN A DAY IN A FEW WEEKS YOU MIGHT NOT HAVE TO PLUG IT IN AT ALL (Except with heavy use).
|
The Air1.Solar Golf Cart Kits.
AS400W48V 400 WATT 48 VOLT Kit.
AS300W36V 300 WATT 36 VOLT Kit.
All you need are a few tools and a drill.
These
Solar Golf Cart Kits are Designed to Fit Many Golf Carts with the
Challenge of the Domed Roof. The Mounting Kit has the Flexibility to
Adapt to
Most Golf Cart Roofs Without Any Other Parts. Simply Find the
Center of the
Roof and Lay Out the Mounting Rails on the Roof. Attach
the L-Feet to the Rails.
Put the L-Foot at the Lowest Position in the
Center. To Clear a Really High
Pitched Dome with 2 Angles, the Rails can
be Placed From 18" to 45" in Width.
Measure carefully before Drilling.
The L-Feet Come with Rubber Gaskets for No
Leaks. 4 100 Watt Solar
Panels Mounted are 48" wide & 88" From front to
back. 3 100 Watt
Solar Panels Mounted are 48" Wide & 66" From front to back.
The
Rails can be Adjusted to create and Overhang if Desired. The Hardware is
Really Cool and will Not RUST. Hex Wrench Included in Kit.
Please call 706-689-0000 with any Questions.
|
The Air1 Solar AS400W48 & AS300W36 Solar Powered Golf Cart Kits.
All you need are a few tools and a drill.
Complete
solar powered golf cart kits. Includes 100 watt
mono-crystalline solar panels. 1 25 amp charge controller. All
cables needed to hook-up to solar panels & batteries. All mounting
rails & hardware included. Batteries NOT Included. This charge controller has been documented bringing bad batteries back to life.This kit may not cure your BAD BATTERY problems but, this controller conditions the batteries without gassing them and micro equalizes on every charge and can increase battery life up to 75%. The batteries chemical process actually control the charging. Before buying this kit, have your batteries
checked so you can see the results for yourself.
The charge controller is 99.5% efficient. Everything you need is
included. It should take 4 to 6 hours to completely install this kit.
Digital voltmeter included, lets you park in the optimum position for improved charging.
If you don't have the technical knowledge and skill to install this kit,
Please Go to a Professional!
DO NOT INSTALL THE SOLAR PANELS IN THE SUN! THE PANELS ARE MAKING POWER IN THE SUN AND CAN CAUSE A FIRE, INJURY OR WORSE!
We assume no liability or responsibility for any installation or use of this kit in any way.
Make
sure the cart is turned off and no load is on the fully charged
batteries. Cart should have brakes applied and no combustible materials
or liquids in the area.
Find a place in the battery compartment
to mount the charge controller. Make sure all leads including the solar
panel connectors,
will reach when picking the spot. Connect the 2 negative wires to the
negative battery terminal. Next connect the disconnect breaker in the
off position to the
positive terminal. It will spark a little on connecting. You might need a
stand-off terminal on some batteries.
Find the center of
the roof. Lay out the rails to size up placement and overhang if
desired. Use the foam from the solar panel box as a template for
spacing. Connect the L feet to the rails hand tight. for best results
position L feet in the center at the lowest position and the front and
rear at the highest position. Drill the holes as close to the front and
back for greater flexibility, such as an overhang in the back. Use the
end rail clamps to position the center panels for position. Substitute
with mid rail clamps when adding the other panels. Add front and rear
panels and lock down with the end rail clamps. Some rail kits are longer
than shown in photo. If the rails don't reach, longer bolts with
washers or vibration isolators can be added to accommodate your roof.
Connect the panels in series starting with the shortest MC4 cable to
it's mate to make sure all connectors will be long enough. Make sure you
have the series connections right before connecting. It takes a special
tool to unplug them easy! We recommend to install panels in the
evening out of the sun and in the morning look for the green light. Park in the sun and check the meter for optimum angle.
This kit is perfect for golfing, urban use and especially hunters. It even brought these old batteries (shown) back to life without having to plug in the AC charger for weeks. 6 hours of full sun is required for best results. Morning sun towards solar noon till 3pm or 4pm is desired. The setting sun is further away and has less charging power.
|
BLOG: WE FIELD TEST THESE SYSTEMS IN THE REAL WORLD!
|
IMAGES BELOW SHOW 1.7K SYSTEM IN THE GEORGIA SUN.190 WATT MONO CRYSTALLINE SOLAR PANELS 24 VOLT MC4.
MAGNUM
E PANEL PURE SINE WAVE INVERTER CHARGER. MIDNITE SOLAR LIGHTNING ARRESTORS. MAGNUM
DIGITAL REMOTE ACCESS MONITORING, WIRELESS IMAG AUTO GENERATOR START,
MIDNITE SOLAR CLASSIC 250 CHARGE CONTROLLER, MIDNITE SOLAR MC4 COMBINER
BOX EDISON NICKEL IRON BATTERY BANK. 24 VOLT SERIES. REBUILT CIRCA 1906-1908.SOLID COPPER COOPER CONNECTORS.
|
Photo Album Gallery Place Holder - Please wait while the Photo Album loads.
If the album does not show, please refresh the page to try again.
|
OFF GRID SOLAR POWER FIELD TESTS ARE HERE.
|
8 100 WATT PANELS. 4 MONO CRYSTALLINE (TOP) 4 POLY CRYSTALLINE (BOTTOM).
MIDNITE SOLAR BREAKER BOX AND LIGHTNING ARRESTOR.
BLUE SKY CHARGE CONTROLLER.
TROJAN T-105 RE 6 VOLT BATTERIES WIRED 24 VOLT.
SAMLEX 2000 WATT PURE SINE WAVE INVERTER 24 VOLT.
BLUE SKY REMOTE MONITORING.
BOTH 12 VOLT AND 24 VOLT REMOTE SYSTEM MONITORS.
AUTO INDUSTRY QUICK DISCONNECT BREAKER.
|
Photo Album Gallery Place Holder - Please wait while the Photo Album loads.
If the album does not show, please refresh the page to try again.
|
|
THIS IS THE 12 VOLT SYSTEM TESTED and RE-CONFIGURED SEVERAL TIMES. ORIGINALLY 4 100 WAT POLYCRYSTALLINE WERE OK BUT AFTER ADDING 2 MORE MONO CRYSTALLINE PANELS, (FROM 1 STRING OF 4 TO 2 STRINGS OF 3) THE BZ CONTROLLER (LIMIT 500 WATTS) AND THE 12 VOLT RAMSOND PURE SINE WAVE INVERTER SEEMED MORE SUITED FOR AN RV OR CAMPING. SHOWN IS 3 100 WATT MONO-CRYSTALLINE AND 4 100 WATT POLYCRYSTALLINE ARRAY. (NOTE THE ODD PANEL WAS USED FOR ANOTHER TEST FOR A SMALLER 12 VOLT SYSTEM). NOTICE THE SOLAR POWERED MOTION ACTIVATED WIRELESS CAMERA. ALSO THE SMALLER 12.6 WATT PANEL FOR SOLAR POWERED ATTIC FAN. 6 TROJAN 6 VOLT T-105 RE-WIRED SERIES/PARALLEL 12 VOLT FOR 660 AMP HOURS.
|
Photo Album Gallery Place Holder - Please wait while the Photo Album loads.
If the album does not show, please refresh the page to try again.
|
|
|
This SOLAR Off-Grid System Was Just Converted From 12 to 24 Volt. ON ANY CHARGE CONTROLLER, HOOK UP THE BATTERY TEMPERATURE SENSOR. SAVE YOUR BATTERIES FROM OVERCHARGE BURNOUT! WHEN BUYING ANY INVERTER MAKE SURE THE VOLTAGE IS 120 VOLT. DON'T BE FOOLED BY 110 VOLT OR 115 VOLT RATING. THE plus or minus 5% CAN DROP YOU VOLTAGE AS LOW AS 106 VOLTS AC WITH NO LOAD. Pay attention to the Inverter's specs. 24 volt and 48 volt systems are more efficient than 12 volt.
The larger 24 volt and 48 volt systems can have single phase (2 hot legs) power in 1 unit. I don't recommend stacking inverters.
|
The top inverter is just sitting there. THIS IS NOT STACKING INVERTERS! LOL
|
THIS 4 100 WATT POLY CRYSTALLINE ARRAY WORK WELL WITH THE 12 VOLT SYSTEM. ANY INCREASE IN PV WATTS IS MORE EFFICIENT GOING TO 24 VOLTS. TESTING MPPT VS PWM ON THE SAME PANELS, MPPT IS BETTER! SCHNEIDER (TRACE) C40 PWM CHARGE CONTROLLER WITH REMOTE AND BATTER TEMPERATURE SENSOR.
2 6 VOLT TROJAN T-105 RE IN SERIES TO 12 VOLT CONFIGURATION.
MODIFIED SINE INVERTER FROM SAM'S CLUB.
NOTICE BREAKER FOR BATTERY QUICK DISCONNECT.
REMOTE MONITOR FOR STATUS.
This DIY SOLAR PANEL ARRAY was finished just in time. The
day I completed all hook-ups and charged the 6 Trojan T-105RE
Batteries, A Storm came up and the grid power went out. My basement
leaks during flash flooding and is one of the reasons for the need for
an alternate power
source. Just as the rain and hail came down in buckets, it was hard to
believe the panels were still charging the batteries (MPPT). Then my
basement
started leaking. I hadn't planned for this to be the test, but I plugged
in a light and my shop vac and kept my basement from flooding. Now I
have a fail safe for my sump pump and small power needs. I'm waiting for
technology to affordably redo my roof with PV Roof Material.
THE HOLE
I DUG THE HOLE EVEN AFTER THE 4 FT DEEP 80 FOOT FRENCH DRAIN TO PUT IN A SUMP PUMP. AFTER SEVERAL AC PUMPS STILL NOT STOPPING THE LEAK ON AC, I DECIDED TO DIG DEEPER AND GO 12 VOLT NOTE THE 12 VOLT SYSTEM WITH A MARINE BILGE PUMP AND FLOAT SWITCH KEEP THE WATER PUMPED OUT OF THE HOLE WITH A HEAD OF 6 TO 7 FEET. WHEN IT DOWNPOURS THE BASEMENT STILL LEAKS. THE HOLE FILLS VERY QUICKLY WITHOUT THE PUMP. THE UNDERGROUND WATER TABLE RISES IN THESE HILLS.
|
Photo Album Gallery Place Holder - Please wait while the Photo Album loads.
If the album does not show, please refresh the page to try again.
|
THIS SYSTEM HAS BENN GOING SINCE 1997. A 400 WATT WIND TURBINE WAS ADDED RECENTLY. THE BP PANELS ON THE LEFT WERE MANUFACTURED IN 1997. THE 100 WATT MONO CRYSTALLINE PANEL ON THE RIGHT WAS ADDED LAST YEAR WITH THE MIDNITE SOLAR BREAKER BOX AND LIGHTNING ARRESTOR.. TRACE (SCHNEIDER TODAY) CONTROLLER AND MODIFIED SINE WAVE INVERTER HAVE PASSED THE TEST OF TIME UNDER THIS MOBILE HOME ON 100 ACRES AS SOLE POWER SOURCE. THE TROJAN L-16 RE B BATTERIES WERE A SOLID INVESTMENT FOR 2013. CUSTOM ARTICULATING PANEL ARRAY FRAME by VETERAN GLASS. NOTICE ADDING 2 MORE 100 WATT PANELS TO THE ARRAY. THE WIND TURBINE AND ALL 6 PANELS POWER THE 24 VOLT THE OFF-GRID CABIN SYSTEM. THE SHED SYSTEM HAS TWO 1997 UNI-SOLAR PANELS, 24 VOLT FLEXCHARGE CHARGE CONTROLLER & THREE 8 VOLT GOLF CART BATTERIES. THIS SYSTEM IS 24 VOLTS. NO 120VAC INVERTER. 24 VOLT 3450 LUMENS OUTDOOR LED LIGHTS ARE VERY, VERY BRIGHT!
|
Photo Album Gallery Place Holder - Please wait while the Photo Album loads.
If the album does not show, please refresh the page to try again.
|
POLE MOUNT KIT UP TO 3 PANELS. 360 DEGREE SWIVEL X & Y AXIS.
|
Photo Album Gallery Place Holder - Please wait while the Photo Album loads.
If the album does not show, please refresh the page to try again.
|
Solar Heater Warms Air to Heat House. Mike Daniels Design.
|
Photo Album Gallery Place Holder - Please wait while the Photo Album loads.
If the album does not show, please refresh the page to try again.
|
|
|
